Cell-Tech^®

Cell-Tech peat has its own sticker in the formulation so no additional stickers are required. Apply Cell-Tech dry to pre-moistened seed, or add water while applying Cell-Tech, or mix with cool, clean water and apply to seed as a slurry (refer to table below). Make sure that inoculated seed is evenly coated. Inoculate bare seed with Cell-Tech peat up to 48 hours before seeding, depending on crop.

Table 2: Cell-Tech peat application rates

Cell-Tech NS peat has its own sticker in the formulation. A separate sticker is not needed. Pour Cell-Tech NS onto seed in the drill box and mix thoroughly until uniformly coated. Layering seed and inoculant while mixing will provide thorough coating of all seeds. Inoculate bare seed with Cell-Tech NS peat up to 48 hours prior to seeding.

Table 3: Cell-Tech NS (non-sterile) peat application

Cell-Tech and Cell-Tech NS peat can be used with different seed treatments, but planting windows vary according to type of seed treated and seed treatment used.

Cell-Tech granular should be applied directly with the seed in the seed row using a granular tank for application. Application rates vary according to row spacing (refer to table below).

• Fill tank to match or slightly exceed seed requirements. Do not overfill tank to avoid compaction.
• Pour into tank through a screen.
• Do not mix Cell-Tech in the same tank with seed or fertilizer.
• Do not leave Cell-Tech granular in the tank overnight as condensation can cause lumps to form.

Table 4: Cell-Tech granular application rates